The 6000 Series Indexing Valve is a water flow operated valve which acts as a manifold. The valve cycles from zone to zone in a clockwise fashion each time the water flow is stopped and started. With its metal die cast body, the 6000 Series Indexing Valve is capable of handling high pressure applications. The 6000 Series Valves are recommended to be used on pump fed systems and can also be used on higher flow pressurized city water systems.

1. Valve Top: A high strength metal die cast top which is secured by eight stainless steel screws.
2. Valve body seal P8600000

3. Rubber flap disk P8003000

4. Standard Stem Only with .032 spring 15 GPM+ P8004002
Light Stem only with .028 spring 10 GPM+ P8004003

5. Standard Stem/disk assy. with .032 spring 15 GPM+ P8003050
Light Stem/disk assy. with .028 spring 10 GPM+ P8003051
Extra-Light Stem/disk assy. with .025 spring 6 GPM+ P8003052

6. 4 Outlet valve bottom P8002704
6 Outlet valve bottom P8002706

7. Vacuum breaker assy. P8005001

8.  CAM: Replacement cams are available to increase or decrease the number of outlets to be used on the 6000 Series Indexing Valves. 6400 Series four outlet valves have interchangeable cams for two, three or four zone operation. 6600 Series six outlet valves have interchangeable cams for five or six zone operation.
9. Valve bottom screws (6) (10-24 x 3/4 Phil Pan SS) P8004410

10. Valve top screws (8) (10-24 x 5/8 Slt. phst. SS) P8004412

11. Cam retaining screws (2) (6 x 1/2 Phil Pan SS) P8004414

12. Valve bottom S.S. Pin (1/4" dia.) P8600001